The comparable structural,elastic anisotropic and thermophysical properties of advanced U–Si fuel to baseline UO2: a DTF method

The European Physical Journal B - Molecular dynamics and Monte Carlo methods are common measurements to study the diffusion coefficients of the fluid particles under restricted conditions. Here,...     

SAPO-34提升铁钒基催化剂抗碱性能研究

采用浸渍法制备Fe-VO_x/SAPO-34和Fe-VO_x/TiO₂脱硝催化剂,探究SAPO-34分子筛与TiO₂两种载体负载铁钒基氧化物催化活性及抗碱性能的差异。借助X射线衍射(XRD)、X射线光电子能谱(XPS)、氨气程序升温脱附(NH₃-TPD)、氢气程序升温还原(H₂-TPR)、原位红外漫反射(in-situ DRIFTs)等表征手段对催化剂的骨架结构、表面物化性质、氧化还原能力以及对反应气体的吸脱附情况进行分析。结果表明:SAPO-34分子筛内部特定的孔道结构和稳定的骨架,有利于活性组分在载体上均匀分散,降低碱金属对表面活性中心的物理覆盖作用;同时其表面丰富的酸位点能够作为碱金属捕获位,保护催化剂表面的活性中心,保证催化剂的吸附-反应过程能够正常进行,从而使Fe-VO_x/SAPO-34表现出良好的抗碱金属能力。     

以磷化铁为添加剂沿(111)面生长磷掺杂金刚石大单晶

掺杂是调控金刚石性能的一种重要手段。本文采用温度梯度法,在5.6 GPa、1 312 ℃的条件下,选用Fe₃P作为磷源进行磷掺杂金刚石大单晶的合成。金刚石样品的显微光学照片表明,随着Fe₃P添加比例的增加,金刚石晶体的颜色逐渐变深,包裹体数量逐渐增加,晶形由板状转变为塔状直至骸晶。金刚石晶形的变化表明Fe₃P的添加使生长金刚石的V形区向右偏移,这是Fe₃P改变触媒特性的缘故。红外光谱分析表明,Fe₃P的添加使金刚石晶体中氮含量上升,这说明磷的进入诱使氮原子更容易进入金刚石晶格中。激光拉曼光谱测试表明,随着Fe₃P添加比例的增加,所合成的掺磷金刚石的拉曼峰位变化不大,其半峰全宽(FWHM)值变大,这说明磷的进入使得金刚石晶格畸变增加。XPS测试结果显示,随着Fe₃P添加比例的增加,金刚石晶体中磷相对碳的原子百分含量也会增加,这意味着添加Fe₃P所合成的金刚石晶体中有磷存在。     

微区X射线荧光成像技术在岩心分析中的应用

微区X射线荧光（Micro-XRF）分析技术是通过微小的X射线光束照射样品，对样品进行原位成分观测的无损分析手段之一，具有灵敏度高、速度快和准确性高的特点。采用微区X射线荧光光谱仪（M6 JETSTREAM）对安徽铜陵冬瓜山铜矿床四段岩心样品进行面扫描，分析不同矿层共17种元素区域分布特征、空间分布规律及组合关系等，结果表明：（1）Cu和Fe两种成矿元素高值空间分布区域基本不重叠，S与Fe分布范围高度重叠，关系密切，微量元素Ni，Bi，Pb，Zn，Si，Na与Cu密切相关，而Ti，Al，K与Fe具有弱相关性；（2）垂向上，Fe元素含量随深度增加逐步增大，而Cu元素含量呈降低趋势，其他元素也随深度呈下降趋势；（3）元素分布受石炭纪中期海底喷流沉积成矿作用和岩浆热液成矿作用叠加改造作用明显；（4）该钻孔矿石矿物以磁黄铁矿、黄铜矿和黄铁矿为主，垂向上组合规律明显，脉石矿物以石英、石榴子石和透辉石为主。该技术通过分析元素空间分布规律、相关性以及矿物组合和分配关系等可对元素富集和运移以及对矿床的成矿机制、成因模式等地质环境和地质过程提供新认识和新证据。结合矿床地球化学特征的分布模式，微量元素可作为寻找主矿种的指示元素，为深部找矿提供依据。此外，该技术能作为预分析技术快速筛选出感兴趣的信息和位置，为后期各种更高精度的微区分析提供不同尺度、不同层次的元素分布信息。     

Investigation of Thermal Gradient Mechanical Fatigue Test Methods for Nickel-based Superalloys

Experimental Mechanics - Temperature gradients significantly affect the material fatigue process. A reliable and robust test procedure is needed for quantifying the effects of temperature gradients...     

Terahertz Dual-Band Near-Zero Effective Index Metamaterial Based on Double-Sided Metal Microstructure

Journal of Russian Laser Research - The zero-refractive-index metamaterials have excellent electromagnetic properties, which provide new ideas and methods to realize the control of electromagnetic...     

CdS/Si nanofilm heterojunctions based on amorphous silicon films:Fabrication,structures,and electrical properties

Shortening the distance between the depletion region and the electrodes to reduce the trapped probability of carriers is a useful approach for improving the performance of heterojunction.The CdS/Si nanofilm heterojunctions are fabricated by using the radio frequency magnetron sputtering method to deposit the amorphous silicon nanofilms and Cd S nanofilms on the ITO glass in turn.The relation of current density to applied voltage(I-V)shows the obvious rectification effect.From the analysis of the double logarithm I-V curve it follows that below~2.73 V the electron behaviors obey the Ohmic mechanism and above~2.73 V the electron behaviors conform to the space charge limited current(SCLC)mechanism.In the SCLC region part of the traps between the Fermi level and conduction band are occupied,and with the increase of voltage most of the traps are occupied.It is believed that Cd S/Si nanofilm heterojunction is a potential candidate in the field of nano electronic and optoelectronic devices by optimizing its fabricating procedure.